The Stingray

In 1966 Roamer revamped its range into, Anfibios, Stringrays, and Mustangs.

In general, the previous patent waterproof cased manual watches became the newly designed Anfibio range, while the waterproof automatic MST436 powered Rotopower range became the basis for the new and iconic Roamer Stingray range. Stingrays were usually automatics – using the new 44 and 28 jewel automatic MST471 movement. There were of course always exceptions with some early manual versions using the MST430 calibre. Later Stingrays also featured manual wind Chronographs, while there was a small number of anfibioMATICs, later Mustangs also had electric and electronic movements.

However, this article is on the Stringray, so rather than explore the entire post 1966 range, let us concentrate on the Stringray.

In 1966/67 the Stingray range started with bezel styles 600, 601 and 602 – within these cases there were a number of dial options. All three were waterproof dress watches, examples:

600:

601:

602:

At this time there was also a prototype Stingray S a 200m Diver, announced in 1966, but seemingly not available until late 1967. The 1966 prototype as shown in the initial advertising (from the 1966 Basel expo) has a number of small detail differences from production versions – most significantly, crown at 2 rather than 4. The large crown at 3 rotates the internal timing bezel.

I believe this is the earliest production model brochure, showing clearly the first dial design, and only minor differences from the prototype above:

In September 1967 the Roamer Stingray S was awarded a Design Gold Medal at the Leipzig trade fair:

The very first production model (This salesman’s sample is marked 1968 on the back) is generally the same as the prototype, including baton hands – but with the crown at 4 like all other production versions:

1967/68 Model Stingray S – gloss crosshair dial, matching bezel ring and plain baton hands.

…Reassemble watch and insert photo here…

1968/69 Model Stingray S – the major difference being the hands.

The Stingray S was a significant success, and the range expanded in 1969 to include the first Stingray Chrono powered by the Valjoux 72. This watch also used the patent Roamer waterproof case design.

Deletions: Dress style Stingray 602 deleted.

The 1969/70 Model Stingray S – changed to utilise the 28 Jewel version of the MST 471 automatic movement, a matt crosshair dial and new hands. The internal bezel dot changed from a triangle to a dot. This watch was the last appearance of the “rotodate” marking on the dial.

The 1970/71 Model Stingray S – saw a major case update, now style 605, with the case given an asymmetric crown guard and a new dial design with tritium lume, new markers and deletion of the crosshairs. In addition, the strap size was changed from 18mm in the earlier 602 models to 20mm in the later 605 models – the new strap featured with a brick pattern and signed Roamer. This year the internal bezel numbers became orange.

The 1970/71 Model Stingray Chrono received only a minor update with the sub dial hands getting the ‘candy stripe’ treatment.

The major Stingray news of 1970 was the introduction of two new Stingray Chrono models – the enormous Chrono-Diver (CD) and the Jet-Time (JT), both powered by the Valjoux 23 movement. The only real difference between the two watches was the outer bezel, the JT featuring a 12/24hr markings. Note the brick linked bracelet.

Deletions: Dress style Stingray 600 deleted.

The 1971/72 production year saw minor and major changes all around. The Stingray S reverted to white bezel numbers and a new Rockshell strap was factory fitted. The Stingray Chrono Valjoux 72 was unchanged while the Chono Diver now used a new movement, the Valjoux 7733 or 7734 depending on date option while Jet Time only came with date and therefore a Valjoux 7734. These were referred to as MOD 733 and 734 respectively.  Here is my 7734 powered w/date Chrono Diver model, shown on the correct bracelet:

The 1972/73 no changes to the S Stingray Chrono or the Stingray Chrono Diver. However a new model of Stingray S was introduced alongside the original model, with an external bezel rather than internal:

Deletions: The last dress style Stingray 601 and the Stingray Jet-Time deleted.

1973/1974 The only Stingray model remaining in the 1973/4 model year was the Stingray Chrono Valjoux 72 (726) which was discontined in 1974 when production of the Valjoux calibre ceased. The final 1973 models featured non tritium lume and white subdials.

Deletions: Stingray Chrono Diver, Pasadena, S and the new S deleted.

From 1975 the Stingray name was no longer used, being replaced in the sporting/dive by the Rockshell models, which had started in 1971/72. The Stingray name was next seen in 2012 as a product of the current Roamer company.

1972-3 Roamer Chrono-Diver

I’ve been waiting for one of these to come along for about 5 years at the right condition/price point. It is powered by a Valjoux 7734, early ones without a date have the Valjoux 23, slightly later a 7733.

Roamer Chrono-Diver – MOD: 734.9120.900

Just a few quick snaps:

Crown guards – crisp and sharp (these are often worn and dented – I doubt this watch saw much wrist time).  For such a chunky watch it has a very slim profile and feels just right on the wrist.

Strap was temporary – you can see the proper factory bracelet in the previous photo. Image from the 1972-73 range catalogue

When it arrived the crystal was very scratched – but as nothing else is damaged/worn I wonder if it had been stored in a drawer face down…

Seems I didn’t post my MKII and MKIII Rockshells…

…on the main site. Outrageous!

The Rockshell MKII

Launched in August 1971, with an MST 482 (modified ETA 2630) as the fully in-house MST522 calibre was not yet in production, and the existing MST471 was not available with a Day-Date function. Shown below is the red dial version of this watch.

This was was probably the desk-diver version of the range, as we will see later the MKIII is much more a true diver’s watch. None-the-less, this watch features a compressor case 100% waterproof up to 200 m., a sloping easy-read housing in high grade saltwater resistant stainless steel with hardened anti-reflective mineral crystal with tritium to the hands and markers.

Here are some more photos (the schmutz is gooey gasket)

Note the plain bracelet clasp

Wristies

The white stuff on the dial is some of the white lines from the crystal, it will brush off when I service the watch. I am really happy with the condition of this one, as often the inner bezel is quite degraded. Win

Next up – the Rockshell MKIII, Electronic

This one is near mint – I would almost suggest NOS, as there is not a trace of wear on the strap (the links are tight as new) or case – however it didn’t come with box or papers.

Also launched in August 1971, with an MST 916 (ESA 9154 Dynatron) – this was a true diver’s watch, featuring 100% waterproof up to 200 m., sloping housing in saltwater resistant stainless steel, with a hardened anti-reflective mineral crystal, dial with raised hour markers and hands in tritium, a large adjustable graduated internal bezel for dive times…

…and the heavier duty strap included an additional clip to expand the bracelet when wearing a wetsuit, plus a clasp lock and the clasp itself is increased in size from 17mm to 20mm.

Wrist shot

Compressor case construction

Fathom Dive Magazine Advert

Wearing it

So, what’s it like to wear. Heavy. Very heavy. But, wrist presence plus. And, that sloping angle, on a watch this thick is great, it makes it much more comfortable to wear. Love it.

Size: 46mm without crown(s) and 160 grams (incl. bracelet).

Update: My Roamer Diver Collection

Also, a little update on my Roamer Diver collection, all on the correct factory straps:

Left to right, early, mid and late Stingray S, Stingray Chrono (Valjoux 72) and the two Rockshells in this post.

Actually there is one more to post, a Seth-Thomas branded version of the Pasadena Valjoux 7734 powered chronograph.